The insulator are most important equipment in transmission Line, Distribution Line and electrical power plant. In this way the insulator are used with pin, insulator and pin are mounted on the frame, which is connected with the Grid power supply. The insulator has to separate of electrical power supply and structure, in this way we are used the ...
In some places in the village of Bedono Demak Regency there is a location with high tidal current velocity, the coordinates of the Location is 6 ° 55'29.0 "S 110 ° 29'11.4" E. In this study estimated the amount of electric power that can be generated from tidal currents in the vil lage Bedono. Estimates are made by modeling the location and the Darrieus turbine using...
In this paper, we are studying about insulators which are used in transmission line, distribution line, power station. the best performance of the insulator during various load are achieving , the various l oad such as 500 Watts, 1000Watts 1500Watts, 2000Watts, 2500 watts during time. The insulator are mounted on the upper surface of pin and attached with power supply.
In this paper we are study about insulator with asbestos coating material. The applied loads are as 1000 Watts, 2000Watts, 3000Watts, 4000Watts, and 5000Watts. The coated insulators are used in distribution Line, in this study we are achieving the maximum Temperature and also achieving the stable point of using insulator.
The substrate which is the first step in designing a patch antenna. Teflon (dielectric constant = 1.33 and height = 3.6 mm) are used as subs for the purpose of designing of Dual Band H Shaped Rectangular Microstrip Patch Antenna. The dimension of patch, ground plane, feed line width, inset notch etc. the design have important effects on the impedance matching.
Create a Login